ARD 37 Sensors + Arduino UNO Kit

SKU
4009-1620
In stock
Processing Time
1 - 2 Business days
Special Price $66.17 Regular Price $68.82
The Arduino Sensor kit consists of 37 individual modules which can be used to carry out many interesting DIY experiments More details
This is a set of 37 sensors ready to be connected up to a micro-controller, e.g. Arduino or RaspberryPi. A great package for Arduino experiments or as a basis for a larger project
  • Wide array of sensors allows you to build almost anything
  • Each sensor has its own data sheet with test code
  • Sensors in this pack can also be purchased individually


  • 37-in-1 Sensors Kit

    If you have started programming with Arduino, you need this sensor kit!

    The bundle is packed with whopping 37 components. Each is an individual module used to carry unique and creative experiments using Arduino board system.

    Each of the modules is individually zip-bag packed and a practical module organizer is included as well. The organizer is a sturdy plastic box, made of class-A durable material.

    So are you looking to make your DIY even smarter? Do you want it to have amazing sensor capabilities? Using more sensors will expand your knowledge about Arduino and potential to become a better programmer. These small DIY additions will make a world of a difference.

    Not just you become more confident with Arduino system but the learning curve is worth it too. Don’t hesitate to order as a beginner, these sensors will come in handy for you.

     

    Individual Module Details

     Following are the complete list of modules included.

     

     

    •  Active buzzer module

    To produce sounds on its own, without any external frequency generation.

     

    •  Passive buzzer module 

    An integrated role in the structure of electronic transducers

     

    •  Common cathode RED&GREEN LED module

    Two LED in one module. With cathode connected, based on a single pin.

     

    •  Two color common cathode LED module

    3mm Two color LED module emits red and green light.

     

    •  Knock sensor module

    Detects the knocks & taps, works like a switch.

     

    •  Shock switch sensor module

    Spring switch or shock sensor, is to induce shock force and transfer result to a circuit triggering it to work

     

    •  Photo resistor sensor module

    Light-dependent resistor or LDR is a light-controlled variable resistor.

     

    •  Push button module

    Module allows detection in states of high or low

     

    •  Tilt switch module

    A ball tilt switch with a metal ball inside, used to detect inclinations of a small angle.

     

    •  RGB LED module

    It can emit various colors of light; three LEDs of red, green, and blue into a transparent shell with four pins. .

     

    •  Infrared transmit module

    The light emitting diode (LED) used to transmit infrared signals from a remote control.

     

    •  RGB colorful LED module

    RGB LED modules can emit numerous light colors.

     

    •  Hydrargyrum switch sensor module

    A mercury switch opens and closes a circuit when some metal mercury connects metal electrodes to close the circuit.

     

    •  Colorful auto flash module

    For automatically let the LED flash in different colors and formats

     

    •  Magnet-ring sensor module

    A reed switch is a magnetic sensor that is normally open and gets closed when exposed to a magnetic field.

     

     Hall sensor module

    It varies its output voltage in response to a magnetic field. Used for proximity switching, positioning, speed detection & more.

     

    •  Infrared receive sensor module

    It emits in order to sense certain aspects of the surroundings nearby.

     

    •  Analogy hall sensor module

     

    •  Magic ring module

    Use case: designed to sit at bottom of a cup and the LED lights up when the cup is tilted.

     

    •  Rotate encode module

    .The sensor is used for determining the angular position of a rotating shaft.

     

    •  Light break sensor module

    Infrared (IR) ( break beam) sensors are easiest method to detect motion.

     

    •  Finger pulse sensor module

    Pulse Sensor is plug-and-play heart-rate sensor for Arduino.

     

    •  Magnetic spring module

    When there is not magnet approaching, the module is de-energized and will output.

     

    •  Obstacle avoidance sensor module

    It can detect obstacles & difference in reflective services.

     

    •  Tracking sensor module

    For performing different kinds of line tracking.

     

    •  Microphone sensor module

    It has two outputs: analog output and digital output support

     

    •  Laser transmit module

    It emits light through an optical amplification process (electromagnetic radiation)

     

    •  Relay module

    It is used for remote device switching over network/internet.

     

     •  Analog temperature sensor module

    It senses temperature and converts it into output signal.

     

    •  18b20 temperature sensor module

     It’s a fairly precise 3-wire digital temperature sensor (±0.5°C range) and up to 12 bits of precision

     

    •  Digital temperature sensor module

    It uses NTC thermostat to measure temperature sensitively. I

     

    •  Linear hall Sensor module

     

    •  Flame sensor module

    It is used to detect fire & flame source, & light source in range of 760nm – 1100 nm

     

    •  High sensitive voice sensor module

     is a straightforward speaking recognition board

     

    •  Humidity sensor module

    It is a calibrated digital temperature and humidity module (includes onboard sensor DHT11)

     

    •  Joystick PS2 module

    It is a thumb operated device for getting operator input. Basically, two potentiometers and a push button switch.

     

    •  Touch sensor module

    The capacitive touch sensor module uses TTP223 touch sensor IC. It provides a sensing area of 11 x 10.5mm for a single integrated touch & a sensor range of ~5mm 

    No
  • Dimensions: 11 x 8 in. ( 28 x18 cm)
  • Weight: 1 lbs. ( 454 gr.)
  • 1 x Active buzzer module
  • 1 x Passive buzzer module
  • 1 x Common cathode RED&GREEN LED module
  • 1 x Two color common cathode LED module
  • 1 x Knock sensor module
  • 1 x Shock switch sensor module
  • 1 x Photo resistor sensor module
  • 1 x Push button module
  • 1 x Tilt switch module
  • 1 x RGB LED module
  • 1 x Infrared transmit module
  • 1 x RGB colorful LED module
  • 1 x Hydrargyrum switch sensor module
  • 1 x Colorful auto flash module
  • 1 x Magnet-ring sensor module
  • 1 x Hall sensor module
  • 1 x Infrared receive sensor module
  • 1 x Analogy hall sensor module
  • 1 x Magic ring module
  • 1 x Rotate encode module
  • 1 x Light break sensor module
  • 1 x Finger pulse sensor module
  • 1 x Magnetic spring module
  • 1 x Obstacle avoidance sensor module
  • 1 x Tracking sensor module
  • 1 x Microphone sensor module
  • 1 x Laser transmit module
  • 1 x Relay module
  • 1 x Analog temperature sensor module
  • 1 x 18b20 temperature sensor module
  • 1 x Digital temperature sensor module
  • 1 x Linear hall Sensor module
  • 1 x Flame sensor module
  • 1 x High sensitive voice sensor module
  • 1 x Humidity sensor module
  • 1 x Joystick PS2 module
  • 1 x Touch sensor module
  • This kit does not include an instruction manual. However their is no shortage of information on the internet on how to use sensors for Arduino. Linksprite has example code for many of the sensors in this kit.
    Write Your Own Review
    Only registered users can write reviews. Please Sign in or create an account
    No
    No
    Videos
    Newsletter