Electronic DIY Kit. D2-1 Intelligent Tracking Line Smart Car Kit

Regular Price $21.74 Special Price $11.31
Description
  D2-1 DIY Intelligent Tracking Car Kit After successful installation, the trolley can move along the black track with a width of about 15mm. The circuit consis More details
SKU
2177-2149
In stock
Processing
1 - 2 Business days

 

D2-1 DIY Intelligent Tracking Car Kit

  1. After successful installation, the trolley can move along the black track with a width of about 15mm.
  2. The circuit consists of photoelectric sensing, voltage comparison and motor drive.
  3. The photoluminescence resistance of the photoluminescence resistor will change when it is projected to black and white parts with different reflectivity.
  4. LM393 compares the size of two photosensitive resistors, controls the operation of the two sides of the motor, so as to correct the direction of the trolley and ensure that the car moves along the black track.
  5. The motor is equipped with a speed reduction device. Do not rotate vigorously with your hands to prevent damage.

                                      

Note:

This kit does not contain batteries.
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understand.

1. After successful installation, the trolley can move along the black track with a width of about 15mm.
2. The circuit consists of photoelectric sensing, voltage comparison and motor drive.
3. The photoluminescence resistance of the photoluminescence resistor will change when it is projected to black and white parts with different reflectivity.
4. LM393 compares the size of two photosensitive resistors, controls the operation of the two sides of the motor, so as to correct the direction of the trolley and ensure that the car moves along the black track.
5. The motor is equipped with a speed reduction device. Do not rotate vigorously with your hands to prevent damage.
Power: two AA batteries (not included)
Installation size: 105x85x46mm/4.13x3.34x1.81''
Weight: 124g
D2-1 DIY Intelligent Tracking Car Kit Includes
1 x LM393
1 x IC Socket
2 x Electrolytic Capacitors(C1,C2 )
2 x Potentiometers(R1,R2)
4 x 51ohm Metal Film Resistances(R5,R6,R11,R12)
2 x 1K Metal Film Resistances(R7,R8)
2 x 10ohm Metal Film Resistances(R9,R10)
2 x 3.3K Metal Film Resistances(R3,R4)
2 x Photoresistors(R13,R14)
2 x Red LEDs(D1,D2)
2 x White LEDs(D4,D5)
2 x S8550(Q1,Q2)
1 x Self-Locking Switch
2 x DC Motors
2 x Wheels
2 x Tires
2 x Screws
2 x Nuts
1 x Screw Cap
4 x Cables
1 x Battery Case
1 x PCB D2-1 Mainboard
NOTE: This kit does not contain batteries
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
No